Hi all,
I'm after a steering wheel interface to use the controls in a VY commodore on an Alpine iDA-X305s head unit but are unsure of what to get.
I've heard about some of the programmable interfaces having a delay from when the button is pushed to the unit actally operating?? I would like to avoid this if possible.
What are the best units to get?
Cheers
Benno
Which steering wheel interface?
Started by Benno25, Aug 17 2012 02:02 PM
4 replies to this topic
#1
Posted 17 August 2012 - 02:02 PM
#2
Posted 19 August 2012 - 10:23 PM
PAC SWI-X (http://pac-audio.com...2&CategoryID=29)
Or CAT (http://www.thecat.net.au/cat10.htm)
I personally have the PAC in my VZ.
No delays etc. If the remote you have doesn't work, try one from a different model - both units can be annoying with the frequencies of the remotes but they usually have a rough guide of what headunits will work. I have a JVC double din, I had to use a random one from a single din to program it.
Or CAT (http://www.thecat.net.au/cat10.htm)
I personally have the PAC in my VZ.
No delays etc. If the remote you have doesn't work, try one from a different model - both units can be annoying with the frequencies of the remotes but they usually have a rough guide of what headunits will work. I have a JVC double din, I had to use a random one from a single din to program it.
Edited by BWGroup, 19 August 2012 - 10:24 PM.
#3
Posted 20 August 2012 - 07:20 PM
Where is the best place to get hold of a CAT10? I can't seem to find anywhere to buy one of these online.
Cheers
Benno
Cheers
Benno
#4
Posted 20 August 2012 - 07:36 PM
Cat10.. the best!!.












